Beats Solo 3 headphones are known for their amazing sound quality and sleek design. However, all of that attraction can turn to frustration if you cannot turn off your headphones.
While it’s safe to assume that you know how to turn off your Solo 3 headphones, we will start with the basic steps to turn them off. But if that doesn’t work, we have a few troubleshooting tips to try as well.
Keep reading to learn how to turn off your Beats Solo 3 headphones.
How to turn off Beats Solo 3: Step-by-step guide
There are two major ways to turn off your Beats Solo 3. They are;
Method 1: Use the headphone buttons
To turn off Beats Solo 3, press the power button until you see a small light indicator turning red to white.
Alternatively, you can simultaneously hold power and volume buttons to turn them off. Hold for about 10 seconds.
Method 2: Use the Beats app
This app is available on Android and iOS devices. To turn off your headphone using this method, do the following:
Open the BEATS PILL+ APP on your phone or tablet.
Next, tap “headphones” from the settings menu. You will see the turn-off option. Select it.
What to do when Beats Solo 3 won’t turn off
Sometimes, you may experience some glitches with your Beats Solo 3, preventing them from powering off using the power button or Beats app.
Below are five things to do when your headphones fail to turn off. Your device should work properly with these solutions.
Solution 1: Disconnect the headphones properly
If your headphones are connected to several devices, it may prevent them from turning off.
To fix this, disconnect your headphones from any connected device. Also, remove the Beats audio jack if it is plugged into other devices.
Now, use the power button to turn the headphones off.
Solution 2: Charge the headphones
Here’s how to do it right:
- Plug your Beats Solo 3 charger into a socket
- Hold the power button for 20 seconds.
- Next, unplug the charger, then connect the headphones to your smartphone.
- Lastly, disconnect your headphones, then try to turn them off.
Solution 3: Update the Firmware
To update your Beats Solo 3 firmware, follow the steps below.
For Android
- Download the Beats app from the Google Play store
- Install the app, and open the notifications tab. If it recommends you update the firmware, select the UPDATE option.
- Leave the app open until the update is completed.
- Press the power button again to see if your headphones turn off.
For IOS Devices
Before updating the Beats firmware on your Apple device, ensure your iOS is updated to the latest version.
Then download the Beats pill+ app and follow the instructions on the screen to update the headphones’ firmware.
As soon as the update is completed, try turning the device off. This should solve the problem.
Solution 3: Reset your headphones
If none of the above methods fixes the problem, the next best option may be to reset your Beats Solo 3. Here’s how:
- Hold down the power button for 10-15 seconds. Ensure your headphones are not plugged into the USB charging cable.
- Release the buttons. You will see the LED light flash three times. When the light stops, your headphones have been reset.
This action should clear any software or hardware issues preventing your headphones from turning off.
Solution 4: Remove the headphone battery
This is the simplest hack to turn your Beats Solo 3 off. However, this method may affect the performance of your device over time.
To use this method, unscrew the headphone case and remove your battery. Your device will turn off immediately.
If the above methods fail, contact Beats customer support for further assistance.
Reasons your Beats Solo 3 won’t turn off
The headphones are paired to a device
Your headphones won’t turn off if they are still in pairing mode. Try turning them off using the controls on the earcup, and unpair them from other devices before using the power button.
Beats Solo 3 battery is low
If the headphones’ battery is low, the device may enter a power-saving mode and only play music when a button is pressed, preventing your headphones from turning off.
Defective power button
If the power buttons on your Beats Solo 3 are stuck or damaged, you may experience difficulties turning the device off.
Remove the cushion from the left earcup of your headphones to check if the button is stuck. If you suspect this problem, unscrew the three screws around the location of the power button.
Next, press the power button from the interior and add a drop of WD-40 to lubricate it. Reassemble the parts, then try turning the headphone off again.
Your headphones are faulty
It is also possible that there’s a problem with your headphone hardware. In this case, you may have to hire a technician to get your headphones to power off.
The firmware is outdated
If the firmware is outdated, you may encounter more than a few challenges with your Beats Solo 3. Update the Beats Updater tool’s firmware to see if this solves the power problem.
Frequently Asked Questions
Does Beats Solo 3 turn off automatically?
No. You must use the power button or Beats app to turn them off.
How do you force turn off Beats Solo 3?
To turn off your Solo 3 headphone, hold the volume down button and the power button for 10 seconds. This should turn the device off completely.
Is it safe to leave Beats Solo 3 on all the time?
No, you should turn off your Beats headphones when not in use. This will also help to conserve the battery and make them last longer.
Conclusion
Follow the steps and guides in this article to troubleshoot any issues with turning off your Beats Solo 3 headphones. If the problem persists, contact customer support for further assistance.
Remember to regularly update your device’s firmware and turn off the headphones when not in use to ensure optimal performance.